Aspen FP2082/2 Universal Peristaltic Pump MK2
Most suited to environments where consistent climate control is critical, the Universal Peristaltic Pump from Aspen is both suitable for both Air Conditioning and Refrigeration systems.
Included in the box you get:
- Universal Pump
- 3m Plug & Play Power/Sensor Cable
- Wall Mounted Bracket
- Fixing Kit
- Install Manual
Key Benefits and Features:
- Operated with two sensors which detect change in air temperature
- Remote install possible
- Pumps contaminated water
- Can run dry, meaning no damage to the pump if this issue occurs
- Suitable for units up to 8.5kW / 29,000Btu/h
- 6.5L/h max. flow
- 12m max. head
|Max Suction Lift ||3m |
|Sound Level at 1m ||47dB(A) |
|Power Supply ||230V AC 50-69Hz 0.2A |
|Max Water Temperature ||40°C / 104°F |
|Dimensions ||115mm(H) x 135mm(W) x 77mm(D) |
The peristaltic pump operates using water level sensors. This allows the pump to detect and be triggered by the level of water in the condensate tray. The detector has two sensors within the head which warm up to 15°C above ambient.
When the lower sensor comes into contact with water, the heat conductivity from the sensor provides a temperature difference energising the pump. Once the level of the water has dropped below the tip of the sensor, the pump will continue until the sensor has completely dried out.